Check up

In the Check up menu, it is possible to see withdrawn objects, reservations, alarms and more.

How to

Reset alarms in EAGLE

1. Go to Check up and select Active Alarms .

2. Click on Check up once more and select Reset alarms.

(Reset Alarms is only displayed in the Check up menu when the Active Alarms list has been open.)

The time before an warning goes off can be changed with the parameter ActivityTimer in AXSOR. 

How to

Use the Check up menu

The start page will show your withdrawn object right when you log in. If you want To see all withdrawn objects, you’ll find them in check up.

1. Go to Check up and select Withdrawn Objects .

2. In the list view you can see:

  • The position
  • Object name
  • The user that withdrew the object
  • When the object was withdrawn

3. Get even more information about the object, by selecting Info .

  • Home position
  • The status (e.g. if the object is removed)
  • The name of the object holder
  • The holders phone number (if selected in AXSOR Iindividuals, contact)

See all reservations of objects in the EAGLE Assembly.

1. Go to Check up and select Show Reservations .

2. In the list view you can see:

  • The position
  • Object name
  • Time span of reservation

3. Get even more information about the object, by selecting Info .

When you log in to the Assembly, misplaced objects will light red to indicate that something is wrong.

But when you select Show Misplaced, the misplaced objects will light green and all other positions will be turned off.

1. Go to Check up and select Show Misplaced .

2. In the monitor you will see:

  • Where the object should be placed
  • Where it currently is placed

For example: X misplaced on Y. 

3. When the positions lights green, it is possible to move the objects. 

Shows all Identity carriers without any connected Object.

1. Go to Check up and select Show Not Connected

2. In the monitor you will see which positions that aren’t connected.

3. The unconnected identity carriers will light green in the assembly, making them possible to withdraw. 

Shows all Identity carriers that are not registered in the EAGLE Assembly, and therefore not recognized.

1. Go to Check up and select Show Not Recognized

2. In the monitor you will see:

  • ID
  • Position

3. The unrecognized identity carriers will light green in the assembly, making them possible to withdraw. 

en_USEN